Electrolux EKD60950 User Manual page 21

Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
Important! Make sure that the retaining
pins on the telescopic shelf runners point to
the front.
Oven lamp
Warning! There is a danger of
electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the oven
for protection of the oven light and
glass cover.
Replacing the oven light bulb/cleaning the
glass cover
1. Turn the glass cover anti-clockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
ble 300°C heat-resistant oven light bulb.
4. Install the glass cover.
Replacing the oven lamp (left side of the
appliance) Cleaning the glass cover
1. Remove the left shelf support rail.
2. Use a narrow, blunt object (e.g. a tea-
spoon) to take off the glass cover and
clean it.
3. If necessary: Replace the oven lamp.
Technical data: 300°C, heat resistant.
4. Install the glass cover.
5. Install the left shelf support rail.
Removing the drawer
The drawer underneath the oven can be re-
moved for easier cleaning.
Removing the drawer
1. Pull the drawer out as far as possible.
2. Lift the drawer slightly, so that can be lif-
ted upwards at an angle of the drawer
guides.
Inserting the drawer
To instal the drawer follow the procedure in
reverse
Warning! When the oven is in use,
heat can build up in the drawer. For
this reason, do not keep flammable
things in there such as e.g. cleaning
materials, plastic bags, oven gloves,
paper, cleaning sprays, etc.
electrolux 21