Front Wheel - Yamaha Drag Star XVS650 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Speedometer cable

Front wheel

To remove the front wheel
6
WARNING
_
G
It is advisable to have a Yamaha
dealer service the wheel.
G Securely support the motor-
cycle so that there is no danger
of it falling over.
_
1. Disconnect the speedometer ca-
ble from the front wheel.
1. Rubber cap
2. Wheel axle
EAU03737
3. Front wheel axle pinch bolt
2. Loosen the front wheel axle pinch
bolt.
3. Remove the rubber cap, and then
EW000122
loosen the wheel axle.
4. Lift the front wheel off the ground
according to the procedure on
page 6-34.
5. Pull the wheel axle out, and then
remove the wheel.
CAUTION:
_
Do not apply the brake after the
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
_
1. Speedometer gear unit
2. Speedometer cable
To install the front wheel
1. Install the speedometer gear unit
2. Lift the wheel up between the fork
NOTE:
_
Make sure that there is enough space
between the brake pads before insert-
ECA00048
ing the brake disc and that the slot in
the speedometer gear unit fits over the
retainer on the fork leg.
_
3. Insert the wheel axle.
6-35
into the wheel hub so that the pro-
jections mesh with the slots.
legs.
EAU03885