PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
1. Speedometer cable
4
Front wheel removal
5
WARNING
It is advisable to have a
6
Yamaha dealer service the
wheel.
7
Securely support the motor-
cycle so there is no danger of it
8
falling over.
1. Remove the speedometer cable
9
from the front wheel side.
1. Axle
2. Pinch bolt
EAU00894
2. Loosen the pinch bolt and wheel
EW000122
axle.
3. Elevate the front wheel by placing
a suitable stand under the en-
gine.
4. Remove the wheel axle and the
front wheel.
NOTE:
Do not depress the brake lever when
the disc and caliper are separated.
1. Speedometer gear unit housing
Front wheel installation
6-31
1. Install the speedometer gear unit
into the wheel hub. Make sure the
wheel hub and the speedometer
gear unit are installed with the
projections meshed into the slots.
2. Lift up the wheel between the
front fork legs and guide the brake
disc between the brake pads.
Make sure the slot in the speed-
ometer gear unit fits over the stop-
per on the front fork outer tube.
3. Install the wheel axle and let the
motorcycle down.
EAU01394