PERIODIC MAINTENANCE AND ADJUSTMENT
1. Nut
2. Washer
3. Remove the burnt-out bulb by pull-
ing it out.
6
1
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the license plate light lens
by installing the washers and the
nuts.
6. Install the license plate light unit by
installing the rubber dampers,
washers and the nuts.
1
2
Replacing an auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
2. Remove the auxiliary light bulb
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by pull-
6-31
page 6-28.)
socket (together with the bulb) by
pulling it out.
1
ing it out.
EAU45224