Oil Pressure - Yamaha YBR125ED Owner's Manual

Oil pressure

1. Check bolt
1. Remove the check bolt
2. Start the engine and keep it idling until oil flows out
of the bleed hole. If no oil comes out after one
minute, turn off the engine immediately so it will
not seize. In such a case go to the nearest Yamaha
dealer or other qualified mechanic for repairs.
3. After checking, tighten the check bolt to the
specified torque.
1
Check bolt torque:
7 N.m (0.7 Kgf.m, 5.0 lbf.ft)
in the cylinder head.