Rmm (Raid Mode Manager) - Buffalo LS410D User Manual

6
Click OK.
7
Choose the array to configure.
8
Select a RAID mode and the drives to be used, then click Create RAID Array.
9
Step through the wizard to create the array.
Note: After changing the RAID mode, create a shared folder.

RMM (RAID Mode Manager)

With RMM, you can create or expand a RAID array without erasing the data on the drives.
1
In Advanced Settings, click Drives.
2
Select RAID.
3
Choose a RAID array.
4
Check "Add a disk to RAID array with RMM. Your data will be preserved. " .
5
Select the drive whose data will be saved from the drop-down menu.
6
Check the drive to add to the RAID array.
38