Buffalo LS410D User Manual page 35

12
Select the level of access:
: Read and write access allowed
13
Click OK.
Notes:
• If both read-only and read & write permissions are given to a user, the user will have read-only access. The most
restrictive attribute will apply.
• If access restrictions are set for users and groups registered in the authentication server, guest or anonymous
connection is not possible with AFP or FTP connections.
• Users who are automatically registered belong to the "hdusers" group. They can be added to other groups from
within group settings.
• The names of registered users are listed in "Users" - "External Users". To delete a user who was registered autho-
matically, select that user and click Delete External User.
• When connecting through AFP or FTP, always use an IP address. Using a server name may cause problems with
authentication.
• To specify a server from another subnet, enter its IP address.
• Use AFP to access access-limited shared folders from OS X 10.7 instead of SMB. Enable "AFP (Mac)" under "LAN
Protocol Support" on the destination folders to use AFP.
• Use OS X 10.5 or later with external authentication. Earlier versions of OS X aren't supported.
: Read access allowed
35
: Access prohibited