Advertisement
2. Pull the rear shelf support rail away from
the side wall and remove it.
2
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
Replacing the oven light bulb/cleaning
the glass cover
Warning! Be careful! There is the risk
of electrical shock!
1. Turn the glass cover anti-clockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
ble 300°C heat-resistant oven light bulb.
New oven light bulb must have the
same parameters as your previous one.
4. Install the glass cover.
Replacing the oven lamp (left side of the
appliance) Cleaning the glass cover
1. Remove the left shelf support rail.
2. Use a cross-tip screwdriver to remove
the glass cover.
3. Use a narrow, blunt object (e.g. a tea-
spoon) to take off the glass cover and
clean it.
4. If necessary: Replace the oven lamp.
Technical data: 300°C, heat resistant.
5. Install the glass cover.
6. Install the left shelf support rail.
Oven Ceiling
You can fold down the heating element on
the oven ceiling to clean the oven ceiling
easily.
Folding down the heating element
1. Remove the shelf support rails.
2. Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring pres-
sure and out along the support on both
sides.
4. The heating element folds down.
The oven ceiling is ready to clean.
electrolux 15
Advertisement
