Advertisement
10 electrolux
With poultry programmes turn over the
food after 30 minutes. The display
shows a reminder.
Assisted Cooking with Recipe
Automatic
This appliance has a set of recipes you can
use. Recipes are fixed and you cannot
change them.
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking menu. Touch
OK to confirm.
3. Select the category and dish. Touch OK
to confirm.
4. Select the Recipe Automatic . Touch
OK to confirm.
When you set the option Manual , the
display shows automatic settings but
you can change them.
Assisted Cooking with Meatprobe
Automatic
1. Activate the appliance.
2. Touch
or
sisted Cooking , the necessary category
and the dish.
3. Touch
or
Meatprobe Automatic .
4. Touch OK to confirm.
The display shows „ Meatprobe ".
5. Install the meat probe.
When the programme ends, an acoustic
signal sounds.
Use a sensor field to deactivate the
acoustic signal.
6. Remove the meat probe.
Meatprobe
Meat probe measures the core temperature
of the meat. When the meat reaches set tem-
perature the oven deactivates automatically.
There are two temperatures to be set
• The oven temperature
• The core temperature
Important! Only use the meat probe
supplied or genuine replacement parts.
1. Activate the appliance.
2. Put the tip of the meat probe into the
centre of the meat.
to set the function As-
to set the function
3. Put the plug of the meat probe into the
socket on the side wall of the oven.
The display shows Meatprobe .
4. Touch + or - in less than 5 seconds to
set the core temperature.
5. Set the oven function and, if necessary,
the oven temperature.
The appliance calculates the provisional
end time for the set temperature (at
least 120°C) again and again. This pro-
cedure can take approximately 30 mi-
nutes. The display constantly shows the
new provisional end time.
The meatprobe must stay in the meat
and in the meatprobe socket during the
cooking process.
6. When the meat reaches set core temper-
ature, an acoustic signal sounds. The ap-
pliance deactivates automatically.
Use a sensor field to stop the signal.
7. Remove the meatprobe plug from the
socket and remove the meat from the
oven.
Warning! The meat probe is hot! There
is the risk of burns! Be careful when
you remove the tip and plug of the
meat probe.
8. Switch off the appliance.
For meat programmes with the meatp-
robe , refer to automatic programmes .
The core temperature is displayed from
30°C.
My Programmes menu
You can store your favourite settings like du-
ration, temperature or oven function. They
are available in My Programmes menu. You
can store 20 programmes.
2
1
Advertisement
