Conventions; Unpacking/Delivery; Safety; Symbols Used To Mark Instructions - Viper GV25 User Manual

Hide thumbs Also See for GV25:
Table of Contents

Advertisement

CONVENTIONS

forward, backward, front, rear, left or right and up are intended with reference to the operator's position, that is to say in working
position with the handle.

UNpACkING/dELIVEry

to unpack the machine, carefully follow the instructions on the packing.
when the machine is delivered, check that the packing and the machine were not damaged during transportation. in case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.

SAFETy

the following symbols indicate potentially dangerous situations. always read this information carefully and take all necessary precau-
tions to safeguard people and property.
the operator's cooperation is essential in order to prevent injury. no accident prevention program is effective without the total coop-
eration of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working or moving
around, are caused by failure to comply with the simplest rules for exercising prudence. a careful and prudent operator is the best
guarantee against accidents and is essential for successful completion of any prevention program.

SyMBOLS USEd TO MArk INSTrUCTIONS

dANGEr!
danger that leads directly to serious or irreversible injuries, or even death.
wArNING!
danger that can lead to serious injuries or even death.
CAUTION!
danger that can lead to minor injuries and damage.
note
indicates a remark related to important or useful functions.

GENErAL INSTrUCTIONS

Specific warnings and cautions to inform about potential damages to people and machine are shown below.
the appliance must
− only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating
it
− only be operated under supervision
− not be used by children
do not use any unsafe work techniques.
Never use the vacuum cleaner without a filter.
switch off the appliance and disconnect the mains plug in the following situations:
− prior to cleaning and servicing
− prior to replacing components
− prior to changing over the appliance
use of the cleaner is subject to current national regulations. besides the operating instructions and binding accident prevention regu-
lations valid in the country of use, observe recognized regulations for safe and proper work.
TrANSpOrT
before transporting the dirt tank, close all the locks.
do not tilt the cleaner if there is liquid in the dirt tank.
do not use a crane hook to lift the cleaner.
OpErATION
take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
the machine working temperature must be between 0°C and +40°C.
the humidity must be between 30% and 95%.
GV12066 (1) – 2012-04-10
USER MANUAL
GV 25 / GV 35 / GV 702
ENGLISH
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gv35Gv702

Table of Contents