Table of Contents
Advertisement
A
X
4
5
F
-
8
X
M
a
x
A
X
4
5
F
-
8
X
M
a
x
6.
The Windows XP Setup screen will appear again saying, "Set
include "Win XP Promise SATA TX2plus (tm) IDE Controller".
NOTE:
If you nee
d to specify any additional devices to be installed, do so at this time. Once all devices are specified, continue to the
next step.-
7. From t
he Windows XP Setup screen, press the Enter key. Setup will now load all device files and then continue the Windows XP
installation.
*******************************************************
Installing Driver in Existing Windows XP System
*******************************************************
WARNING:
If you will be moving the boot drive containing the existing Windows XP operating system to the
SATA150 driver MUST be loaded on to this hard drive while it is still attached to your existing hard drive controller. Do not
attach this drive or any other hard drive to the SATA150 controller before completing this step.
After enabling the SATA150, Windows XP setup will show a "Found New Hardware" dialog box. Under Windo
Controller" will be displayed.
1. Click on "Next," and from the generated list box, choose
up will load support for the following mass storage devices:" The list will
"Install from a list or special location (Advanced)"
117
O
n
l
i
n
e
M
a
n
u
a
l
O
n
l
i
n
e
M
a
n
u
a
l
SATA150 connector, the
ws XP, "Mass Storage
Advertisement
Table of Contents
