Remote Start - Directed Electronics 7111A User Manual

Remote Start

This feature allows you to remotely start and run your vehicle for a
pro gram ma ble period of time. This makes it possible to warm up the
engine, and adjust the interior tem per a ture of the ve hi cle with the cli-
mate control system. If interior heating or cooling is desired, the climate
controls must be preset, and the fan blower must be set to the desired
level prior to remote starting the vehicle.
To remote start the vehicle:
• Press the button on the remote control for 1 second.
• The parking lights flash to confirm that the vehicle is attempting to
start. In gasoline vehicles, the engine will start 4 seconds after the
parking lights flash. In diesel vehicles, the engine will start when
the WAIT-TO-START timer has expired.
• Once the vehicle has started, it will run for the pre- pro gram med
period of time (12, 24, or 60 minutes) or until a shutdown input
is trig gered.
Toggles
Scan mode
4
Warning!
(1) Never remote start your vehicle when
the keys are in the ignition, except when performing
Valet Take-Over, and (2) Never start the vehicle if it
is not in PARK or NEUTRAL
Bank and
present
indicator
Warning!
It is unsafe to operate a vehicle's motor in a
garage or other closed off area. Breathing the ex haust
from the vehicle is hazardous to your health. Never
activate the remote start in an enclosed space.
Tune mode
indicator
11:53
CATEGORY CH
XM1-1
REW FF PLAY/PROG
1 2 3
SCAN
© 2010 Directed Electronics. All rights reserved.
Channel
and text
indicator
CH-001
NR DISC-
4 5
SOUND
VOL
DISC+
6