Language; Calling Up Language Selection; Turn The; Selecting The Language - Becker TRAFFIC ASSIST Operating Instructions Manual

Language

The text of the touch-screen images can be
displayed in various languages.

Calling up language selection

The following button allows selection of
various different languages.
> Push the button
Language
The language selection appears.
In the language selection, the available
languages are shown in a list which ex-
tends over several pages. Each list area is a
contact surface. The individual contact
surfaces are marked with the language des-
ignation and the associated national flag.
Turn the page
These buttons
ing in the direction shown by the arrow
through the pages of the list.
The current page of the list and the total
number of pages is shown between the
buttons.

Selecting the language

If you change the language the software
restarts.
.
> Push the contact area of the desired lan-
guage.

Cancelling the language selection

The language selection is closed by push-
ing the back button, and the setting menu
then appears.

Moodlight

allow page turn-
Using this button, the light bars on the
side can be switched on, switched to red or
blue, or switched off completely.
> Push the button
The light bars are controlled accordingly.
Note:
Please deactivate the Becker moodlights
while driving in your vehicle in order to
prevent visual distraction from the road
traffic!
SETTINGS >>>
> D
> GB
> F
> I
> E
> P
> NL
.
Mood light
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
83