Becker TRAFFIC ASSIST Operating Instructions Manual page 39

You can also:
• display the destination on the map
• define options of the drive profile
• save the destination in the destinations
memory
• start directions to the destination im-
mediately.
Selecting the town
The destination town can be entered using
its name or postcode. During this process,
when each letter is entered a possible town
is displayed and/or when each character is
entered, a possible postcode is displayed.
When the towns are displayed, large
towns have priority over the alphabetical
sequence. Example: If you enter the initial
letter "K", the Traffic Assist indicates
"Köln" as a possible city, and not the town
which is first alphabetically. Traffic Assist
rules out all impossible combinations of
letters and postcodes and only activates
those boxes of letters and/or characters
which will produce an existing town and/
or postcode (Smart speller).
> Press the town and/or postcode.
> Enter the letters of the destination town
and/or the letters/numbers of the post-
code one after another.
Note:
If necessary, you can switch off the smart
speller in the navigation settings.
It should also be noted that in southern
countries (e.g. Italy), the "prefix" (e.g. via
Gran Mundo) needs to be entered after-
wards (e.g. Gran Mundo_via).
NAVIGATIONAL MODE
The OK key
The key can be used to transfer the
OK
destination selected into the route calcula-
tion menu. If the destination required ap-
pears in the upper edge of the display once
the first letters or numbers have been en-
tered, you can transfer the destination im-
mediately with without using the list
OK
function.
> Press the key to transfer your desti-
OK
nation into the route calculation menu.
Note:
If two words have to be entered, these
should be separated by a
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
character.
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
39