Becker TRAFFIC ASSIST Operating Instructions Manual page 68

>>> NAVIGATIONAL MODE
Point northwards (toolbar)
Use the compass key to orient the map on
> D
the touchscreen towards the north.
> GB
> F
> I > Press the compass key.
The map is pointed north on the touch-
> E
screen.
> P
Available POIs along the route (toolbar)
> NL
With the POI button, you can display
available POIs along the route and set a
> DK
POI as a stopover.
> S
> N
> Press the POI button.
> FIN
A display of the POIs available along the
> TR
route appears.
> GR
> PL
> CZ
> H
> SK
68
A maximum of six POIs are displayed
simultaneously. The example shown has
five POIs, two each from the Restaurant
and Parking categories and one from the
Petrol station category, recognisable by
the category icons at the left of the
distance indications. The
indications represent the direct distance to
the POIs.
The stylised road on the left indicates on
which side of the road the POIs are
located. The numbering of the POIs refers
to the position of the POIs in the list on
the right (POI No. 1 appears at the very
bottom of the list).
To select a POI as a stopover:
> Press the desired POI.
It is set as the stopover and the Traffic
Assist starts route calculation to the
stopover.
To set a POI category:
You can set which categories the Traffic
Assist should take into account when
displaying the POIs.
> Press the POI button.
The current settings are displayed.
distance
> Press one of the categories set, e.g.
Petrol station.
The complete category list appears.