Ending The Status Display; Day/Night Display; Calibration; Starting Calibration - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

>>> SETTINGS
> EN
The charge condition is displayed using
the level gauge. In the example, the bat-
tery still has a charge of two-thirds of its
capacity.
The charging operation is indicated by the
mains socket symbol in the status display.

Ending the status display

By pushing the button
play is ended and the setting menu ap-
pears.
96

Day/night display

Using the following button, you can
change between the day and night screen
displays:
> Push the button
The brightness of the screen display
changes from day to night display or vice-
versa.
The icon for the active setting is highlight-
ed.
• Left icon: Day display
• Right icon: Night display
the status dis-
OK

Calibration

If the touch-screen reacts incorrectly
to the touching of the screen in specific ar-
eas, calibration is required.

Starting calibration

The calibration can be started using the
.
Brightness
following button.
> Push the button
The calibration process is started.
You will be guided through the procedure
by means of text instructions.
.
Calibration