The Load Map Key; The Offroad Key - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

>>> NAVIGATIONAL MODE
The GPS key
The number of satellites received, your
> EN
current position and your current speed
are displayed in the GPS information
window. It is also possible to save your
current location.
> Press
in the settings menu.
GPS
The GPS information window appears.
> To save your current location, press the
Save current position
Save your location in the same way as de-
scribed in See "Saving destination" on
page 48.
The information window can be closed by
pressing the
64

The Load map key

The Traffic Assist operates using the map
data stored on the memory card. Pressing
the
map data.
> Press
The Load map settings menu appears.
> Select the desired map by pressing the
button.
button.
button displays the loaded
Load map
in the settings menu.
Load map
relevant button.

The Offroad key

In the Offroad settings menu you can set
whether the Traffic Assist starts guidance
to the destination:
• if you are in an non digitised (offroad)
area
• if your destination is in an non digitised
area
With an activated offroad function the
Traffic Assist shows you the air direction
(as the crow flies) to the next digitised
street or the air direction from the nearest
digitised road to your destination.
See "Offroad navigation" on page 65.
> Press in the settings menu.
Offroad
The Offroad settings menu appears.
> Press on the button in order to activate
or deactivate the function.
> Confirm your settings by pressing
.
OK