Factory Settings; Car Integration - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

Factory settings

You can reset your Traffic Assist to the
factory settings.
This resets all settings that have been
changed and deletes the stored destina-
tions, stored routes, number lists* and
Bluetooth device lists*.
> Press the
Factory settings
> Press the button.
Yes
The Traffic Assist is reset to the factory
settings.

Car integration*

When using the optionally available cable
for output of the audio signal/connection
of a microphone, you must define wheth-
er announcements and music are to be
output via the internal loudspeakers.
> Press the
Car Integration
button.
> Switch the internal loudspeaker on us-
ing the
button.
> Confirm your settings by pressing
*Applies only to the Bluetooth®-enabled Traffic Assist 7977
button.
button or off using the
.
OK
SETTINGS >>>
> EN
99