Language; Calling Up Language Selection; Turn The; Selecting The Language - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

Language

The text of the touch-screen images can be
displayed in various languages.

Calling up language selection

The following button allows selection of
various different languages.
> Push the button
Language
The language selection appears.
In the language selection, the available
languages are shown in a list which ex-
tends over several pages. Each list area is a
contact surface. The individual contact
surfaces are marked with the language des-
ignation and the associated national flag.
Turn the page
These buttons
turning in the direction shown by the ar-
row through the pages of the list.
The current page of the list and the total
number of pages is shown between the
buttons.

Selecting the language

If you change the language the software
.
restarts.
> Push the contact area of the desired lan-
guage.

Canceling the language selection

The language selection is closed by push-
ing the key
appears.
allow page
, and the setting menu then
SETTINGS

Moodlight

Using this button, the light bars on the
side can be switched on, switched to red or
blue, or switched off completely.
> Push the button
Mood light
The light bars are controlled accordingly.
WARNING
Deactivate the Becker moodlights while
driving in your vehicle in order to pre-
vent visual distraction from the road and
traffic.
>>>
> EN
.
97