Automatic On/Off; Switching The Function On / Off; Information - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

>>> SETTINGS
Tones
> EN You can switch the Traffic Assist signal
tones on and off. This can also be effected
by clicking on the display buttons.
> Press
.
Tones
Depending on the previous setting, the
signal tones are switched on or off. The
current setting is indicated via display of
the relevant icon in color.
• Left icon: Tones switched on
• Right icon: Tones switched off

Automatic on/off

The Traffic
automatically to sleep mode when the
vehicle ignition is switched off.
Prerequisite:
• The Traffic Assist must be connected to
the vehicle cigarette lighter (see also
page 24).
• The cigarette lighter is de-energized
after the ignition is switched off.
• The relevant function can be switched
on at the Traffic Assist.
98

Switching the function on / off

> Press
Depending on the previous setting, the
function will be switched on or off. The
current setting is indicated via display of
the relevant icon in color.
• Left icon: The function is switched on,
the Traffic Assist does switch off auto-
matically.
• Right icon: The function is switched
off, the Traffic Assist does not switch off
automatically.
Assist can switch
.
Automatic on/off

Information

Information concerning the Traffic Assist
is displayed using the following buttons.
> Push the button
Information
The information display appears.
Please note particularly the product desig-
nation and the details of the software ver-
sion. Always quote these details in the
event of queries with Harman/Becker serv-
ice department.
.