Table of Contents
Advertisement
56
What to do if ...
What to do if ...
Problem
The oven is not heating up
The oven lighting is not op-
erating
F11 appears in the clock
display
A fault code that is not list-
ed above appears in the
clock display
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven door
during (or just after) baking or roasting may cause the glass to steam up.
Possible cause
The oven has not been switched
on
The clock has not been set
The required settings have not
been set
The oven's automatic cut-out
has been triggered.
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
The meat probe has short
circuited or the plug of the meat
probe is not firmly in position in
the socket
Electronic fault
Remedy
Switch oven on
Set the current time on the clock
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip sev-
eral times, please call a qualified
electrician
Replace oven light bulb
Insert the meat probe plug into
the socket on the oven side wall
as far as it will go.
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment
Advertisement
Table of Contents
