Table of Contents
Advertisement
36
Using the Oven
Everyday use of the SETTINGS MENU
Smell filter
The energy consumption is higher when the smell filter is activated.
If the smell filter is deactivated in the SETTINGS MENU menu, it will automatically
switch itself on after 100 operating hours, during a baking or roasting cycle, in order to
self-clean.
Heat+Hold
The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the bak-
ing or roasting process is completed.
This is helpful, for example, if your guests are late.
Pre-condition for Heat+Hold:
• Set temperature is above 80°C
• Fixed duration
Switching on Heat+Hold
1. Select oven function, meat programme or automatic programme.
2. If necessary, set duration or core temperature.
3. Press the SELECTION
4. Confirm with
The Heat+Hold function is now switched on.
5. As soon as the function is completed, a signal sounds and Heat+Hold starts.
The function set runs at 80°C for 30 minutes.
After 30 minutes with Heat+Hold are over, the oven switches itself off.
Irrespective of the function set, Heat+Hold remains active. You can change between
the oven functions.
Heat+Hold can be activated or deactivated in the SETTINGS MENU menu.
EXTRA TIME MENU
Allows the last oven function to continue to run after the time has elapsed.
Pre-condition:
• All oven functions with DURATION or Auto Weight.
• No oven functions with MEATPROBE.
The EXTRA TIME MENU can be switched on and off in the SETTINGS MENU menu.
Switching on EXTRA TIME MENU
Oven function is completed.
Signal sounds and message appears.
1. Press any button (except ON/OFF
2. Message for EXTRA TIME MENU appears for approx. 3 minutes.
3. Activate with
button repeatedly until HEAT+HOLD flashes.
.
EXTRA TIME MENU.
).
Advertisement
Table of Contents
