Erasing Tracks - Suzuki Duality Owner's Manual

5. Stop Recording - Press the PLAY/STOP button, the REC button or the recording
track button to stop recording. The REC indicator turns off and the recorded track
PLAY/STOP
indicator is lit to show the track now contains data.
Note: When the record memory is full, recording will stop automatically and "FUL" will
appear on the LED display.
Playback
1. The Track LED indicators will show which tracks contain recorded data. If you do
not wish to hear one of the two Tracks, press the corresponding button to turn that
ACCOMP MELODY
track off. Its LED indicator will turn off.
2. Press the PLAY/STOP button to hear the recorded track(s). The PLAY indicator lights
up and the beat indicators will flash per the beat pattern and tempo.
PLAY/STOP
You can change the tempo of your recorded track by pressing the TEMPO button
while the recording is being played back.
You may also accompany the recorded tracks on the keyboard while the recording
is playing back.
3. Press the PLAY/STOP button to stop the playback.
Playback will also stop automatically when the recording reaches its end.

Erasing Tracks

To erase the music recorded on the tracks:
1. Press and Hold the REC button down.
2. Press the track button that you wish to erase while you continue to hold down
REC
the REC button. This will immediately erase the existing data from your previous
recording.
ACCOMP MELODY
3. Release the REC button (the track and REC indicators are blinking).
4. Press the track button again (the indicators will go off ).
5. Repeat Steps 1 through 4 until all the tracks that you desire are erased.
28
O W N E R ' S M A N U A L