Table of Contents
Advertisement
Synchronized Start — Synchronized Start mode makes the auto accompaniment
standby. The auto accompaniment will start as soon as you play a recognized chord
SYNCH START
in the auto accompaniment section of the keyboard.
1. Press the SYNC START button, the beat indicator dots above the TEMPO buttons
will blink at the current tempo, indicating that the synchronized start mode is
ready.
Please Note: You may add an introduction by pressing the INTRO/ENDING button
after pressing the SYNCH START button.
2. Play a recognized chord in the Auto Accompaniment Section of the piano.
If the auto accompaniment is off, (the auto accompaniment indicator is off ), only
the percussive rhythm will play.
3. Press the START/STOP or the SYNCH START buttons to stop the accompaniment.
If the SYNCH START button is used, the synchronized start mode will be on
standby. Use the INTRO/ENDING button to stop with an ending pattern.
Variation
To select the variation of the main patterns, press the VARIATION button. The
indicator will light up. If you press the VARIATION button, then press the INTRO/
VARIATION
ENDING button, the variation pattern will play after the introduction.
Fill-In
The fill feature will insert a short rhythmic pattern of one to two measures in
length, depending on the rhythm style selected and the variation.
FILL IN
Holding down the FILL IN button will extend the fill indefinitely.
Assigning The Split Point For The Auto Accompaniment
The keyboard is split into two sections at the default split point G1 key for auto
accompaniment.
SETUP
A different split point for the auto accompaniment can be assigned in the Function
menu "Auto A.Split".
Please see the Function section of this manual for more information.
26
O W N E R ' S M A N U A L
Advertisement
Table of Contents
