Operating Instructions - lifeSMART LS-PP1500-6NAT User Manual

PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate
heater in upright position with caster wheels attached.
When using remote control, please pull out the insulating film as the following steps.
Remote control

OPERATING INSTRUCTIONS

1、Start and select working mode
Or
Or
Insulating film
PULL
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Select a heat setting.
Press the MODE button to toggle between the three heat
settings.
Power for heat-up mode is 1500W; and heat-down is
1000W. ECO mode is an Economic Energy Saving
Function. When ECO mode is chosen the heater will
consume one-third less power once the room temperature
reaches a certain point.
7
Battery cover