Software - Setup Wizard; Launching Setup Wizard For The First Time - TRENDnet TV-IP501W User Manual

This section describes the how to setup a camera using the Setup Wizard. To install the Setup Wizard on
a system running Windows, launch the Setup Wizard on the installation CD-ROM and follow the setup
instructions. Once the software is installed, the Setup Wizard utility is ready for use.

Launching Setup Wizard for the first time

To launch the Setup Wizard, click Start > Programs > TRENDnet > Setup Wizard > Setup Wizard
Install Your Camera
Connect the camera to your LAN using

the provided RJ45 cable.
Connect the AC Power Adapter to the

back of the camera and to a live power
socket.
Click Next to continue.

Select Your Camera
The following screen appears showing the
cameras that have been found on your
network.
Click on the camera you want to configure.

Click Next to continue

Authentication
On the following screen type in the ID and
Password that you will use to configuring the
camera settings.
Type a User ID in the ID field.

Type the password of the User in the

Password field.
Click Next to continue

TV-IP501W Internet Camera User Manual

Software - Setup Wizard

12