Assembly And Use For The Single Serve Cup - Ninja BL770 series Owner's Manual

Assembly and Use for the Single Serve Cup

WARNING: Never leave the appliance unattended while in use.
ASSEMBLY
Fig. 1 Fig. 2
IMPORTANT: Make sure that the motor
base is plugged in for use.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Add ingredients to the single serve cup.
3 Place the single serve blade onto the cup and
screw it tightly until you have a good seal.
(Fig. 1)
4 Turn the single serve cup upside down and
place it onto the motor base, aligning the
tabs on the cup with the motor base. Turn the
single serve cup clockwise. (Fig. 2) Turn the
power button on, the single serve button will
illuminate.
5 Press down on the Single Serve button in
short intervals to activate. (Fig. 3)
BL770_series_30_IB_ENG_120627_3.indd 10
USE
Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
Fig. 4
6 Once you have reached your desired
consistency, turn the power button off. Turn
the single serve cup counter clockwise and
pull straight up to remove. (Fig. 4) (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do
not add ingredients past the "Max" fill line.
7 Turn the cup upright and remove the single
serve blade by twisting the blade assembly
clockwise.
8 Place the To-Go drinking lid onto the single
serve drink cup, twist to seal and enjoy!
9 Make sure that the motor base is unplugged
when not in use.
NOTE: To order additional Single Serve Cups, please
visit our website: www.ninjakitchen.com or feel free
to contact customer service: 1-877-646-5288.
www.ninjakitchen.com
REMOVAL
Fig. 5
10
12-06-27 11:55 AM