Page 2
CAUTION: Blade assemblies are FOLLOWING: sharp and removable, handle with care. When handling the blade assemblies, READ ALL INSTRUCTIONS BEFORE always hold by the shaft. USING YOUR NINJA KITCHEN SYSTEM ® 1200 ™ CAUTION: DO NOT BLEND HOT FOODS OR HOT LIQUIDS.
Page 3
9 DO NOT operate any appliance with 20 To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO a damaged cord or plug, or after the NOT try to defeat the interlock mechanism; appliance malfunctions, has been dropped or damaged in any manner.
Contents Thank you for Getting Started ......................4 purchasing the Using the Ninja Kitchen System 1200 ..............5 ® ™ Ninja Kitchen ® Using the Pitcher.......................8 System 1200 ™ Using the Bowl ......................9 Care & Maintenance ....................10 Speed Setting & Uses ....................11 Troubleshooting Guide .....................12...
Getting Started a 6-Blade Assembly (pitcher) j 72 oz. Pitcher b 4-Blade Assembly (bowl) k 40 oz. Bowl c Dough Blade (bowl) l Gear Shaft d Dough Paddle (bowl) m Motor Base e Pitcher Lid with Locking Handle n Control Panel f Bowl Lid with Locking Handle o Suction Feet p Power Cord (not shown)
Using the Ninja Kitchen System 1200 ® ™ PLEASE KEEP THESE IMPORTANT CAUTION: Blades SAFEGUARDS IN MIND WHEN USING THE are not locked in APPLIANCE: place. If using the pour spout, ensure WARNING: Never leave the appliance the lid is fully unattended while in use.
Page 7
WARNING: Never leave the appliance unattended while in use. CAUTION: Handle the blade assemblies with care, as the blades are very sharp. IMPORTANT: Make sure that the motor base is plugged in for use. Fig. 3a Fig. 1 Fig. 2 Fig.
Page 8
Using the Ninja Kitchen System 1200 - cont'd ® ™ WARNING: Never leave the appliance unattended while in use. CAUTION: Handle the blade assemblies with care, as the blades are very sharp. IMPORTANT: Make sure that the motor base is plugged in for use.
Using the Pitcher Fig. 8 Fig. 7 Fig. 9 USING THE 6-BLADE ASSEMBLY To remove the container, press the power button ( ) to turn the appliance Off. Wait for the attachment to stop Holding the 6-Blade assembly by the shaft, place it moving before removing.
Using the Bowl WARNING: Never leave the appliance unattended while in use. CAUTION: Handle the blade assemblies with care, as the blades are very sharp. IMPORTANT: Make sure that the motor base is plugged in for use. Fig. 11 Fig. 10 USING THE 4-BLADE ASSEMBLY USING THE DOUGH BLADE CAUTION: Blades are not locked in place.
Page 11
Fig. 13 Fig. 12 USING THE DOUGH PADDLE REMOVAL IMPORTANT: Use only the “DOUGH” button when To remove the lid, press the release button on the lid using this attachment. and pull the lid handle up to a 90° angle. Place the motor base on a clean, dry, level surface such Turn the bowl counter-clockwise and lift it to remove it as a counter or table top.
Care & Maintenance HOW TO CLEAN HOW TO STORE CAUTION: Make sure that the motor base is Store the Ninja Kitchen System 1200 upright with ® ™ unplugged from the power source before inserting the pitcher on the motor base, 6-Blade assembly inside or removing any attachment and before cleaning.
Troubleshooting Guide PROBLEMS POSSIBLE REASONS & SOLUTIONS Make sure the container is securely placed on motor base. Make sure the lid is securely on container in the correct position (align arrows). The appliance is turned Off. Press the power button ( ) to turn On. Check that the plug is securely inserted into the electrical outlet.
Page 15
(as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. PRODUCT REGISTRATION Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja product within ten (10) days of ®...
Page 16
1-877-646-5288 www.ninjakitchen.com Copyright 2015 Euro-Pro Operating LLC Euro-Pro and Ninja are registered trademarks of Euro-Pro Operating LLC. Kitchen System 1200 is a trademark of Euro-Pro Operating LLC Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.