Reset The Motor Thermostat; How To Clean; Care & Maintenance - Ninja BL770 series Owner's Manual

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water
or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place the pitcher, single serve cup and bowl in the
dishwasher. Place the lids and attachments on the
top rack. Use caution when handling the blade
assemblies as the blades are very sharp.
NOTE: You may also wash the containers by filling ¾
of the container with warm water and a drop of dish
washing detergent, placing the corresponding lid on the
container and pressing the pulse button a few times.
Once clean, remove the container from the motor base.
Rinse the container, attachment and lid under running
water. Allow all the parts to dry before storing.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
BL770_series_30_IB_ENG_120627_3.indd 14
HOW TO STORE
1 Store the Ninja Mega Kitchen System upright with the
®
pitcher on the motor base, 6-Blade assembly inside the
pitcher and lid on the pitcher. Do not place anything on
top. Store the bowl with the 4-Blade assembly inside
and the lid on top. Store the single serve cup and the
rest of the attachments along side the appliance or
in a cabinet where they will not be damaged and
won't cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja Mega Kitchen System features a unique
®
safety system which prevents damage to the unit's
motor and drive system should you inadvertently
overload your appliance. If the appliance is being
overloaded, the motor will stop and the power light will
remain lit and speeds 1, 2 and 3 will flash. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure
that no food is jamming the cutting blades or
attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug
the appliance into the electrical outlet.
5 Proceed to use the appliance as before making
sure not to exceed the recommended maximum
capacities.
www.ninjakitchen.com
14
12-06-27 11:55 AM