Setting The Time - Citizen C390 Instruction Manual

7. Setting the Time (Time is corrected by digital display)
• When digital time is corrected, the second, minute, hour, 24 hour and UTC hour and
minute hands of the analog time are corrected automatically in conjunction with digital
time.
1. Turn the crown and set the mode hand to the time [TME] mode.
2. Press either button (A) or button (B) to access the city to be corrected.
3. When the crown is pulled out to the second click (time setting position), the watch
enters the time correction state.
4. When button (A) is pressed, the location to be corrected changes each time it is
pressed. Select the location to be corrected. (The location that is flashing is the
location that can be corrected.)
• When button (B) is pressed in the [SMT] daylight savings time correction state,
daylight savings time can be set (ON) or canceled (OF).
• "Seconds" return to zero when button (B) is pressed in the "seconds" correction state.
• When the crown is turned forward (clockwise) in the "hour" or "minute" correction
states, correction is made in the positive direction. Turning the crown continuously
allows "hours" or "minutes" to be corrected continuously. Although correction can be
made in the negative direction when the crown is turned backward (counter-
clockwise), always make sure to turn the crown forward to ensure that the time is set
correctly.
Continuously turning the crown, allows for continuous correction. When stopping it,
rotate the crown either to the left or to the right.
• Switching "12H/24H time" is performed by pressing button (B).
20
5. After corrections have been completed, return the crown to the normal position.
Crown
pulled out to
second click
Crown
returned to
normal
position
Mode hand
<Normal Time Display>
<Time Correction State>
Switching daylight
savings time
(A)
Seconds
(A)
Minutes
(A)
Hours
(A)
Switching 12H/24H time
(A)
21