Citizen C320 User Manual

MODELS: JN2030-51ANavisail (World Time Yachting
SETTING INSTRUCTIONS
M - Mode selection.
A - Sets selected setting segment, start and stop of timer or chronograph.
B - Selects setting segment, reset and split time in chronograph mode, and reset and flyback in timer modes.
C - Crown.
IMPORTANT NOTE
The analog time (large hour and minute hand and 24 hour hand) cannot be set independently of the digital time and so the dig-
ital time must be set first in order to set analog time.
TO SET TIME
Press and hold B down for 3 seconds, hour and minute hands will retract to the 12 o'clock position. This will permit an unob-
structed view of the digital displays during setting procedures. (After digital time is set, press B to release hand retractor). Press
and release M to move mode indicator hand to time (TME) then set city code to one representing your time zone. Press and
release A to change city code eastward and C to move westward. When city code has been selected, pull M out. Hour, minute
and second figures will all flash. Press and release C to select daylight or standard time (summer indicates daylight) hour hand
will move accordingly. Press and release A, seconds will blink. Reset seconds by using C. Press and release A, minutes will
blink. Use C to advance minutes. For fast advance, hold C down. Press and release A, hours will blink. Use C to advance hours.
Note AM or PM. Press and release A, 12H or 24H will blink. Use C to select AM/PM time (12H) or military time (24H). Press M
in to finalize setting of digital time. All other cities are adjusted automatically when one city is set to correct time, including the
UTC analog display. After you have set digital time and released the retractor, if you want analog (hands) time to indicate the
time in your zone (city code), press A and C simultaneously. The digital time (your time zone) will be switched to the analog dis-
play and vise versa. City code and digital time can now be changed to your time zone by using A (eastward) or B (westward).
Both analog and digital time now match. If you want a time zone different than that shown on the digital display, to be shown by
the analog (hands), move the digital time to the desired zone and repeat the switching function.
TO SET ALARMS
Use the M to move the mode indicator to AL-1. Use A or C to select city code. Pull mode button out to setting position, display
blinks. Use C to set alarm on or off. Press and release A, hours will blink. Correct hours with C. Press and release A, minutes
will blink. Correct minutes with C. Press M in to finalize alarm setting. Alarm 2 is set in the same way as Alarm 1. When alarms
sound, press any button to stop sounding.
TO SET CALENDAR
Using the M, move the mode indicator hand to CAL. Note city code. If needed, use A to move city code eastward and C to move
westward. Pull M out to setting position, month number will flash. Correct month by using C. Press and release A, date will flash.
correct date by using C. Press and release A, year will flash. Use C to correct year. Press M in to finalize calendar setting. Year
will disappear and day will be shown in its place.
For further instructions, see instruction manual.
CITIZEN WATCH EUROPE GmbH
Hans-Duncker-Strasse 8, D-21035 Hamburg
Tel. 040/734 62-277/278/279
C320
CAL. No.
Features include:
• 23 CITIES/21 TIME ZONES
• ANALOG AND DIGITAL DISPLAYS
• CALENDAR
• RACE TIMER 1
• RACE TIMER 2
• 2 ALARM
• 24 HOUR 1/100 SECOND CHRONOGRAPH
• 24 HOUR HAND
• ANALOG GREENWICH TIME
• HAND RETRACTOR
• ZONE SETTING MODE
© 1999 Citizen Watch Company Europe
USER'S GUIDE
Internet http://www.citizenwatch.de