Setting The Time - Citizen Eco-Drive BN2031-85E Instruction Manual

Setting the time

• Make sure that the watch is not wet before operating the crown or any buttons.
• To unscrew/screw the crown/button, see page 11.
34
1
Pull the crown out to position
hand points 0 second.
The watch stops and the water depth hand and
maximum water depth hand move to their reference
positions.
• The power reserve indication hand points to
"READY" after quivering.
2
Rotate the crown to set the time.
• Pay attention to whether the time set is AM or PM.
• Date indication starts to change as the setting passes
10PM. Rotating the crown counter-clockwise does
not turn back the date indication.
3
Push the crown in to position
with a reliable time source to finish the procedure.
as the second
in accordance