Table of Contents
Advertisement
8
Operating instructions
• you use incorrect cookware.
automatically.
• you do not stop a cooking zone or change the heat setting. After some time
on and the hob stops. See the table.
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch the control bar at the necessary heat set-
ting. Change up or down, if it is necessary. Do not
release before you have a correct heat setting.
Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
2. Immediately touche the necessary heat setting. After 3 seconds
display.
To stop the function change the heat setting.
-
6 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
(
comes on in the display).
comes on and after 2 minutes the cooking zone stops
-
5 hours
-
4 hours
1.5 hours
P
comes on in the
comes
-
Advertisement
Table of Contents
