Advertisement
Quick Links
1. BILL OF MATERIAL
Camera
2. SPECIFICATION
• High sensitive 1/4" HD Color CMOS Sensor
(1089)
• Reverse/ Non-reverse image selectable
• Parking guide line on/off selectable
• Waterproof (IP67)
• 170° wide viewing angle
• Super sensitive low Lux performance
• 12VDC (Tolerance 9V ~ 16V)
• Chipset 1089 HD
• Pixel: NTSC/PAL 800x533
• 0.05 Lux
3. WIRING
To monitor
Ground
12VDC Rear Lamp
To monitor
Ground
12VDC Rear Lamp
For technical support contact 888-941-3060 or email info@visiontechamerica.com
Manual
24' Male to male RCA cable
Camera
Video
Cut loop for non-mirror image
Camera
Video
Cut loop to disable grid line
WWW.VISIONTECHAMERICA.COM
USER'S MANUAL
Model: VTK230HD
MINI LIP MOUNT
4. Installation Tip
1. Select suitalbe flat position
2. Drill a hole according to the
near the license plate light
the camera diameter
and mark it.
3. Mount the camera into the
4. Read section #3 for wiring
hole using your two thumbs to
help.
press it evenly for tight and flat
mounting
If using the camera as front
camera, cut the white loop
to get non-mirror image.
White
If using the camera as rear
view camera, do not cut the
white loop.
Blue
Cut the blue loop to turn off
the parking assist grid lines.
Advertisement
