Rear Wheels; Front Wheels - Baby Jogger CITY CLASSIC DOUBLE Assembly Instructions Manual

Front Wheels

1
To install front wheels, lay stroller
back so the handle is resting on
the floor. Lock front wheel to
prevent the forks from swiveling.
3
Tighten by turning the wheel
lever clockwise while holding
the opposite side.
2
2
Insert the front wheel into the fork tips by
aligning the axle flats with the fork tip flats.
4
Close the wheel lever making sure that
it is flush with the tubing. Be sure not to
overtighten.

Rear Wheels

1
To install, gently slide the rear wheel's axle into the hole in the frame until the wheel clicks into place.
2
To remove, simply press
the wheel button while
gently sliding the wheel
away from the frame.
3