Page 1
™ Assembly InstructIons Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. this product complies with Bs eN 1888:2003 inc. A1,2,3: 2005...
Page 2
For the sake of your precious cargo, please read these warnings before using your stroller. Warning: • WARNING: This stroller is not suitable for running, jogging, skating or rollerblading. • WARNING: It may be dangerous to leave your child unattended. •...
Page 3
Warning: • The passenger shall remain seated (no standing in the stroller). • Watch out for cars – never assume that a driver can see you and your child. • This stroller seats one passenger. • This seat unit is not suitable for children under 6 months. •...
FRAMe Lay stroller frame down so the Snap red safety strap to Turn stroller over to handle is on the bottom. Begin the frame under the fold upright position. to unfold stroller by pulling the mechanism on both sides auto-lock lever while pulling the of the stroller before use.
FROnt WHeeLS Swivel/Straight Feature To engage stationary wheel: • Raise the lever up to lock the front wheel assembly in the straight position. Repeat on opposite wheel. To install front wheels: Lay stroller back so the handle is resting on floor. To engage swivel wheel: Slide the wheel axle into the wheel mount until •...
ReAR WHeeLS to install rear wheels: Align rear wheel axle with rear wheel mount on stroller frame. Insert wheel axle into the wheel mount until it clicks into place. Gently tug on the wheel to make sure it is locked into place. Repeat on other side.
BRAke • Your City Versa ™ features a hand operated parking brake. to engage parking brake: • Pull brake lever clockwise until it clicks into place. Gently push stroller to ensure the brakes are properly engaged. to release parking brake: •...
CAnOPy to attach the canopy: Place the rear of the canopy Align canopy bracket with Firmly press the canopy over the top of the seat frame. open space on the seat frame. bracket on the seat frame Secure canopy Velcro ®...
AttACHing tHe SeAt to attach the seat: note: Determine whether you want the seat forward facing or parent facing. The steps for placing the seat on the frame are the same for either seating direction. Align seat adaptor brackets with mounting brackets on stroller frame. The seat will click into place.
SAFety HARneSS to adjust harness height: Warning: Avoid serious injury from falling or sliding out. Always properly adjust and fasten safety harness. Pinch the top of the harness Slide the harness clip out and clip to unlock. re-clip to the seat loop closest to the child’s shoulder height.
Page 13
SAFety HARneSS to buckle: to unbuckle: Simply push top right buckle clip into the Push one side of the center button and pull the right side of the center buckle until it clicks corresponding side buckle clip away from the into place.
FOOtWeLL AdjUStMent to adjust footwell angle: 1 Press large round buttons on upper 2 Adjust footwell up or down to desired portion of footwell. position and release buttons so it clicks into place. to adjust footwell length: 2 Slide in or out until it clicks into place. 1 There are two length positions on your footwell.
SeAt ReCLine to recline the seat: note: The steps for reclining the seat are the same no matter which direction the seat is facing. 1 Lift up on flat lever located under the top seat back. 2 While lifting up on the lever, pull down to lower seat and release the lever at the desired position.
FOLd – FORWARd FACing Pinch seat fold buttons located beneath the recline lever on the top of the seat back. Push seat forward until it is folded in half. Unsnap red safety straps Pull up on the handle from both sides of the marked "Pull to Fold."...
FOLd – PARent FACing Pinch seat fold buttons located beneath the recline lever on the top of the seat back. Push seat forward until it is folded in half. Unsnap red safety straps Pull up on the handle from both sides of the marked "Pull to Fold."...
StORAge StRAP A seat storage strap is provided to keep your City Versa seat in place when folded. Locate seat storage strap on the back of the Versa seat. Unsnap the storage strap from its secured position on the seatback.
UnFOLding & ReMOving tHe SeAt to unfold the stroller: Pull up on the auto-lock to release the frame while lifting up on the stroller handle until the frame clicks into place. Pull the top of the seat up to unfold until it clicks into place.
ReMOving tHe CAnOPy & SeAt FABRiC to remove the canopy: Pull the canopy bracket out and ® Detach canopy Velcro from the away from the seat frame to seat Velcro on both sides. detach. Repeat on other side. to remove the seat fabric: Unsnap seat fabric from From the back of the seat, Press gray buttons and pull...
BASket The basket of your City Versa comes fully attached. However, it is easy to remove for cleaning. ™ note: Be sure the lower front of the basket is placed in the groove of the Versa plate near the bottom of the frame.
CARe & MAintenAnCe To preserve the longevity of your stroller, it is important to perform simple, regular maintenance. From time to time, make sure that the joints and folding areas are still in good condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop for added lubrication. All repairs should only be carried out by an authorized dealer.
• Any stroller that is returned in an unsanitary condition [ie covered in urine, vomit, animal faeces, food waste, mould etc] or with bits missing, as we will not be able to inspect/repair it • Any claims arising from products bought outside the UK, or products bought through outlets that are not Baby Jogger Approved Dealers •...
Page 24
Imported by Kooltrade Ltd. M34 3QA customerservice@kooltrade.co.uk 0161 335 2508 • The Baby Jogger Company: 8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 T: 800.241.1848 • F: 804.262.6277 • www.babyjogger.com...
Need help?
Do you have a question about the city versA and is the answer not in the manual?
Questions and answers