Baby Jogger CITY CLASSIC DOUBLE Assembly Instructions Manual page 4

Seat
1 2
Snap seat to frame. Attach bottom part of seat to
the footplate with the Velcro.
4 5
Thread folding strap Attach folding strap to folding
through opening in seat. trigger and secure the triangle
shaped fastener.
4
Warning: always
be sure the safety
strap is securely
snapped onto the
frame before using
stroller!
3
Wrap bottom straps around
frame, thread strap through
D-ring and secure.
6
Attach Velcro around
center frame.
7
Snap seat strap
around rear frame.
Reclining Seats
1
To recline: Pinch the clamp and slide it down the recline strap to
desired recline and push seat down.
2
To return to the upright position: Hold the D-ring on the end of the recline strap in one hand
and use the other to pinch the clamp and slide it up the strap.
Stroller is packaged with seat support frames and
can be easily removed or inserted into the seat backs
if additional support is desired.
NoTE: Be sure to remove the frames from the
back of the seats before washing.
5