Page 8
• This stroller does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable pram body, cot, or bed. • Accessories which are not approved by Baby Jogger shall not be used.
Page 9
FRAME REAR WHEELS 1 Unpack the stroller frame from the 8 Installation box and set the wheels aside. • Align the rear wheel axle with the Unlock the stroller by pulling the wheel mount on the stroller frame Storage Lock Lever. and insert it into the wheel mount 2 Lift the footwell and seat away until it locks into place.
Page 10
REMOVING THE SEAT FABRIC WARNING: Always use the crotch 28 Unsnap the seat fabric from the strap in combination with the seat frame on both sides. shoulder straps and waist belt. 29 From the underside of the seat, 16 Slide the harness pads up to access unfasten the hook-and-loop and plastic guide on strap.
• Do not press, iron, dry clean, tumble dry or wring the fabric. • If the seat covers need to be replaced, only use parts from a Baby Jogger Authorized Dealer. They are the only ones that are guaranteed to have been safety tested and designed to fit this seat.
Page 12
Baby Jogger’ s Limited Lifetime Warranty Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer’ s defects include but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components shall be warranted for one year from the date of purchase (except for tubes and tires).
Need help?
Do you have a question about the City Tour and is the answer not in the manual?
Questions and answers