Reclining Seat - Baby Jogger F.I.T Assembly Instructions Manual

Seat
1
2
Secure seat fabric to Secure seat straps around the bottom
frame by lining up
of the frame, behind the front wheel.
snap placement on
Thread one seat strap through the
frame and fabric. Start D ring of the other strap, and fasten
at top snap and work both Velcro sides firmly together.
your way down frame.
4
Be sure that fold strap rings are secured to the
frame before use.
4
Warning: always
be sure the safety
strap is securely
snapped onto the
frame before using
stroller!
3
Secure safety straps to
both sides of the frame
before use.
To fold stroller:
Remove child from
seat. Unsnap safety
straps from frame
and pull upwards
on the fold strap
with a gentle tug.

Reclining Seat

1
To recline: Pinch the clamp behind the seat, and slide it down to desired recline. Pull seat down
on both sides to match recline position of clamp.
Warning: This seat is suitable from 6 months and up.
•
Weather Cover: If desired, pull weather cover
down and over the seat back mesh. Secure
firmly over both sides of seat. When not in
use, roll weather cover up and fasten with
elastic loop and barrel provided under top of
the seat fabric.
Reverse steps to return to the upright position.
5