Front Wheel; Rear Wheels - Baby Jogger F.I.T Assembly Instructions Manual

Front Wheel

3 4
Tighten by turning the Close the wheel lever by
wheel lever clockwise while pushing it flush against
holding the opposite side. the tubing. Be sure not
to over tighten – light
pressure is needed to
close the wheel lever. You
should not strain to close.
2
1
To install, squeeze the two brake
calipers together and push the
black lever backwards to open
brake pads. Release calipers so
that they spring open.
2
Insert the front wheel into the fork
tips by aligning the axle flats with
the fork tip flats.
5
Squeeze the two brake
calipers together against
the metal rim of the front
wheel and flip the black
lever forwards to close brake
pads.

Rear Wheels

1
To install, gently slide the rear
wheel's axle into the hole in
the frame until the wheel
clicks into place.
2
To remove, simply press
the wheel button while
gently sliding the wheel
away from the frame.
3