Reclining Seat; Adjusting The Brake - Baby Jogger Q-SERIES SINGLE Assembly Instructions Manual

assembly instructions Q- 2004 8/13/04 5:12 PM
Brakes
Hand Brake with Parking Button
• To use the parking button feature, simply squeeze the brake handle and push the park brake button.
Cylinder
Small
Ring
Ring
Rear Wheel Parking Brakes
• Simply push brake pedal down to engage
brake and lift up to release.
10
Page 10

Adjusting the Brake

• If you don't have good braking action, simply
squeeze the brake handle five or six times. If the
problem persists, loosen the brake's cylinder ring
to adjust the small ring, and then move the small
ring away from the handle to tighten the cable.
(Please do not over tighten!) To lock the rings,
tighten the cylinder ring against the handle while
holding the small ring in place.
Brake
Pedal

Reclining Seat

• Pull on strap when you
want to return the seat to
its upright position.
• Simply adjust seat straps to
desired degree of recline.
11