Brake Light Switch Adjustment - Yamaha TW200 Owner's Manual

1997
Hide thumbs Also See for TW200:
Table of Contents

Advertisement

1
a
b
1. Adjusting nut
2. Free play
The rear brake pedal free play
should be adjusted to 20 ~ 30
mm at the brake pedal end.
Turn the adjusting nut on the
brake rod in direction a to
increase free play or in direc-
tion b to decrease free play.
PERIODIC MAINTENANCE AND MINOR REPAIR
w
8 Brake pedal free play should
be
checked
whenever
chain is adjusted or the rear
wheel is removed and then
reinstalled.
8 Check the operation of the
brake light after adjusting the
rear brake.
8 If it is impossible to make
proper adjustment, consult a
Yamaha dealer.
6-20
EW000106
the
a
1. Brake light switch
2. Adjusting nut
Brake light switch
adjustment
The rear brake light switch is acti-
vated by the brake pedal and is
properly adjusted when the brake
light comes on just before braking
takes effect. To adjust the rear
brake light switch, hold the switch
body so it does not rotate while
turning the adjusting nut.
Turn the adjusting nut in direction
a to make the brake light come on
earlier.
Turn the adjusting nut in direction
b to make the brake light come on
later.
1
1
2
2
b
3
4
EAU00713
5
6
7
8
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents