Yamaha TW125 Owner's Manual page 66

1
1. Headlight bulb holder
3. Unhook the headlight bulb hold-
er, and then remove the defec-
tive bulb.
w
Headlight bulbs get very hot.
Therefore, keep flammable prod-
ucts away from a lit headlight bulb,
and do not touch the bulb until it
has cooled down.
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
PERIODIC MAINTENANCE AND MINOR REPAIR
a
a. Do not touch this area.
cC
Do not touch the glass part of the
headlight bulb to keep it free from
EW000119
oil, otherwise the transparency of
the glass, the luminosity of the
bulb, and the bulb life will be
adversely affected.
clean off any dirt and fingerprints
on the headlight bulb using a cloth
moistened with alcohol or thinner.
EC000105
Thoroughly
6-35
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by
installing the screws.
7. Have a Yamaha dealer adjust
the headlight beam if necessary.
6