Replacing The Fuse - Yamaha TW125 Owner's Manual

To charge the battery
Have a Yamaha dealer charge the
battery as soon as possible if it
seems to have discharged. Keep in
mind that the battery tends to dis-
charge more quickly if the motorcycle
is equipped with optional electrical
accessories.
To store the battery
1. If the motorcycle will not be used
for more than one
remove the battery, fully charge
it, and then place it in a cool, dry
place.
2. If the battery will be stored for
more than two months, check it
at least once a month and fully
charge it if necessary.
3. Fully charge the battery before
installation.
4. After installation, make sure that
the battery leads are properly
connected to the battery termi-
nals.
PERIODIC MAINTENANCE AND MINOR REPAIR
cC
8 Always
charged. Storing a discharged
battery can cause permanent
battery damage.
8 To charge a sealed-type (MF)
battery, a special (constant-
voltage) battery charger is
required. Using a conventional
battery charger will damage
the battery. If you do not have
month,
access to a sealed-type (MF)
battery
Yamaha dealer charge your
battery.
EC000102
keep the battery
charger, have a
6-33
2
1
1. Fuse
2. Spare fuse

Replacing the fuse

The fuse holder is located behind
panel B. (See page 6-6 for panel
removal and installation procedures.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "OFF" and turn
off all electrical circuits.
2. Remove the blown fuse, and
then install a new fuse of the
specified amperage.
Specified fuse: 20A
EAU01307
6