Front Wheel - Yamaha Sniper T135 SE Owner's Manual

Front wheel

To remove the front wheel
WARNING
G It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Place the motorcycle on the cen-
terstand.
2. Disconnect the speedometer ca-
ble from the front wheel.
1. Speedometer cable
3. Remove the axle nut and the
washer.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24360
EAU37760
EWA10820
1. Axle nut
2. Washer
4. Pull the wheel axle out, and then
remove the wheel.
CAUTION:
Do not apply the brake after the
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
jection on the wheel hub fits in ei-
ther slot of the speedometer gear
unit.
1. Speedometer gear unit
2. Lift the wheel up between the fork
NOTE:
ECA11070
Make sure that there is enough space
between the brake pads before insert-
ing the brake disc and that the retainer
in the speedometer gear unit fits over
the slot on the fork leg.
EAU37770
6-32
legs.
6