Replacing An Auxiliary Light Bulb - Yamaha MT-01 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw
2. License plate light lens
3. Remove the defective bulb by pull-
ing it out from the socket.
6
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the license plate light lens
by installing the screws.
6. Install the license plate light cover
by installing the screws.
6-31
Replacing an auxiliary light
bulb
This model is equipped with three aux-
iliary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Auxiliary light bulb A
2. Auxiliary light bulb B
3. Auxiliary light bulb C
1. Remove the headlight unit by re-
moving the bolts on each side.
EAU36840