Shift Pedal; Brake Lever - Yamaha MT-01 Owner's Manual

Make sure that the appropriate setting
on the adjusting dial is aligned with the
arrow mark on the clutch lever.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-21.)
INSTRUMENT AND CONTROL FUNCTIONS

Shift pedal

1. Shift pedal
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 5-speed con-
stant-mesh transmission equipped on
this motorcycle.
3-11
EAU12870

Brake lever

1. Brake lever
2. Brake lever position adjusting knob
3. Distance between brake lever and handlebar
grip
4. " " mark
The brake lever is located at the right
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.
The brake lever is equipped with a
brake lever position adjusting knob. To
adjust the distance between the brake
lever and the handlebar grip, turn the
adjusting knob while holding the lever
pushed away from the handlebar grip.
When the desired position is obtained,
EAU33851
3