Yamaha Fazer FZS1000 Owner's Manual page 61

1. Radiator cap
4. Remove the radiator cap.
WARNING
_
Never attempt to remove the radia-
tor cap when the engine is hot.
_
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Coolant drain bolt
5. Remove the coolant drain bolt to
EW000067 drain the cooling system.
6. After the coolant is completely
drained, thoroughly flush the cool-
ing system with clean tap water.
7. Install the coolant drain bolt, and
then tighten it to the specified
torque.
NOTE:
_
Check the washer for damage and re-
place it if necessary.
_
Tightening torque:
Coolant drain bolt:
7 Nm (0.7 m·kgf)
8. Pour the recommended coolant
6-14
into the radiator until it is full.
Recommended antifreeze:
High-quality ethylene glycol anti-
freeze containing corrosion inhib-
itors for aluminum engines
Antifreeze/water mixture ratio:
1:1
Coolant quantity:
Total amount:
2.4 L
Coolant reservoir capacity:
0.3 L
6