Tachometer Unit; Self-Diagnosis Devices - Yamaha Fazer FZS1000 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Tachometer
2. Tachometer red zone
3. Clock

Tachometer unit

The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
CAUTION:
_
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11,500 r/min and above
_
This tachometer unit is equipped with a
clock.
To set the clock:
1. Push both the "SELECT" and
"RESET" buttons for at least two
seconds.
2. When the hour digits start flashing,
push the "RESET" button to set
the hours.
3. Push the "SELECT" button to
change the minutes.
4. When the minute digits start flash-
ing, push the "RESET" button to
set the minutes.
EAU03954
5. Push the "SELECT" button to start
the clock.
NOTE:
_
After setting the clock, be sure to push
EC000003
the "SELECT" button before turning the
key to "OFF", otherwise the clock will
not be set.
_

Self-diagnosis devices

This model is equipped with a self-di-
agnosis device for the following electri-
cal circuits:
G
G
G
G
If any of those circuits are defective,
the tachometer will repeatedly display
the following error code:
CB-23E
Use the chart below to identify the
faulty electrical circuit.
CB-29E
Specific r/min
3,000 r/min
4,000 r/min
7,000 r/min
9,000 r/min
3-5
throttle position sensor
speed sensor
EXUP system
overturn switch
Circuit-specific Current
0 r/min for
number of r/min
engine
3 seconds
for 2.5 seconds speed for
(See the table 3 seconds
below.)
Faulty electrical circuit
Throttle position sensor
Speed sensor
EXUP system
Overturn switch
EAU04290