Helmet Holder - Yamaha Fazer FZS1000 Owner's Manual

1. Projection
2. Seat holder
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
NOTE:
_
Make sure that the seat is properly se-
cured before riding.
_
INSTRUMENT AND CONTROL FUNCTIONS

1. Helmet holder

2. Unlock.
Helmet holder
To open the helmet holder, insert the
key into the seat lock, and then turn the
key as shown.
To lock the helmet holder, turn the key
to the original position, and then re-
move it.
WARNING
_
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
_
3-12
EAU04291
EW000030
3